WEIWEIBEIER NKXR35Z Needle Roller Cylindrical Roller Thrust Ball Bearings with Cage 35x47x52x30mm (1 PC) NBX3530Z Combined Bearings NKXR35 Z

Needle roller / cylindrical roller thrust bearings combine a radial needle roller bearing and a cylindrical roller thrust bearing based on the 811 series. Supplies these bearings in the following two series:NKXR series ( fig. 1 ), cylindrical roller thrust bearing is separableNKXR .. Z series ( fig. 2 ), non-separable bearingThese bearings are supplied without an inner ring. For applications where it is not possible to harden and grind the shaft, the bearings can be combined with an inner ring ( fig. 3 ). Appropriate inner rings are listed in the product tables and can be ordered separately.Needle roller / cylindrical roller thrust bearings, NKXR .. Z seriesNeedle roller / cylindrical roller thrust bearings in the NKXR .. Z series ( fig. 2 ) are nonseparable. They have a stamped steel cover that extends over the shaft washer of the cylindrical roller thrust bearing. It is firmly attached to the housing washer that is integral to the needle roller bearing outer ring. The cover makes these bearings non-separable.Supplies the cylindrical roller thrust bearing in this series filled, as standard, with a high-quality grease that has good rust inhibiting properties. The cover, which has no lubrication holes, forms a gap-type seal with the shaft washer to retain the grease in the bearing.

• Model: NKXR35Z; Type: Needle roller / cylindrical roller thrust bearings
• Size: 35x47x52x30 mm; Quantity: 1 Pc
• Material: STEEL; Surface Roughness: Ra 0.05
• Coatings: Anti-rust Oil; Structure: Needle Roller
• Torque Capacity: 35*47*52*30mm